Description

These Ultra-Compact, high flow injectors are just 48mm end to end and dimensionally identical to the popular 60lb/hr Deka IV Shorty Injectors! These injectors flow 80 lbs/hr at 43.5 PSI ( 3 BAR )! In addition, these units are high-impedance. Despite the high flow rate, they are linear and controllable at low pulse widths. This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector.

These injectors are able to function at high fuel pressures and don’t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures.

Engine performance and running quality are enhanced through the optimized spray pattern. Unlike competitors “pencil stream” high flow injectors; these High Flow injectors utilize a multi-orifice tip providing a true 26 degree spray pattern for improved mixture preparation. This results in lower BSFC and better idle quality than many injectors with less flow.

FEATURES:

Genuine, reliable Siemens Injectors

Excellent response characteristics

Robust Design

High Impedance

Low Impedance performance characteristics with High Impedance Compatibility

Specifications:

Coil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM driver modifications required)

Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 80 lb/hr = 875 cc/min

Offset: 0.065ms

Turn on time @ 14VDC: 1.3ms

Turn off time: 0.7ms @ 600KPa

Connector: Bosch EV1

Series: DEKA 5 ( DEKA V )

Orifice Type: 8 hole Multi-orifice

Spray Pattern: 26 Degree Spray Cone

Factory fitted with Viton upper and lower o-rings

48mm end to end

35mm top o-ring to bottom o-ring Short Style