Description

These injectors flow 220 lbs/hr at 43.5 PSI ( 3 BAR ) and more at higher PSI! These units are low-impedance and require peak and hold injector drivers or additional resistors for saturation drivers. Despite the high flow rate, they are linear and controllable at low pulse widths compared to other extreme flow injectors! These injectors are sometimes referred to as 212lb/hr or 225lb/hr injectors.

These injectors will allow you to run methanol, ethanol and other flex fuels with fewer injectors for high horsepower applications. Don't settle for questionable modified high flow injectors when you can have Genuine Siemens quality and performance with these injectors. These injectors are perfectly suited for Extreme horsepower turbo & supercharger applications.

Features:

Genuine, reliable Siemens Injectors

Excellent response characteristics

Robust Design

Low Impedance

Fits in most Deka I, Deka IV Long Style, Deka V Long Style, & Deka VII Long Style applications

Specifications:

Coil Resistance: 2.27 Ohms / Low Impedance / Low-Z (ECM peak & hold driver or modifications required)

Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 220 lb/hr = 2433 cc/min

Offset: 0.64ms

Turn on time: 1.5ms

Turn off time: 1.3ms

Connector: Bosch EV1

Series: DEKA 4 ( DEKA IV )

Orifice Type: Single Orifice

Spray Pattern: 10-15 Degree Pencil Cone

Factory fitted with Viton upper and lower o-rings