Bosch 044 fuel pumps mount in-line (out side of your gas tank), most commonly rear center under your car or truck. Each Bosch 044 in-line fuel pump provides 300LPH of flow and operate at 72.5 PSI. Bosch 0-580-254-044 fuel pumps are comparable to the Walbro 255LPH high pressure in-line fuel pumps which can both support vehicles for up to 600-700 horse power. Can be used in sequence with an in-tank Bosch 040 fuel pump.

P/N: 50-1005

Fuel Injected Engines:
- 1600 HP @ 50 PSI (Naturally Aspirated)
- 1400 HP at 80 PSI (Boosted)
Carbureted Engines:
- 1800 HP @ 7 PSI (Naturally Aspirated)
- 1700 HP @ 30 PSI (Boosted)
* Precise, consistent fuel delivery
* Self priming
* Pump element is 100% tool steel
* Body machined from billet aluminum
* All billet body pumps are 100% serviceable
* Breakaway coupling prevents pump / motor damage in the event of contamination
* For carbureted or injected engines
* -12 inlet and -10 outlet o-ring ports
* 5.5 lbs

Compatible Fluids:
- Gasoline
- Methanol
- Diesel
- Ethanol
- All racing fuels

Part No: DB2015-A
Fuel Injected Engines:
- 1100 HP @ 50 PSI (Naturally Aspirated)
- 1000 HP at 80 PSI (Boosted)
Carbureted Engines:
- 1300 HP @ 7 PSI (Naturally Aspirated)
- 1100 HP @ 30 PSI (Boosted)

* Precise, consistent fuel delivery
* Self priming
* Pump element is 100% tool steel
* Body machined from billet aluminum
* All billet body pumps are 100% serviceable
* Breakaway coupling prevents pump / motor damage in the event of contamination
* For carbureted or injected engines.
* -12 inlet and -10 outlet o-ring ports
* 5.5 lbs

– 12 AN inlet and 10 AN outlet
– Supports 2000 hp @ 14 VDC EFI (1000 hp on Methanol) 2400 hp @ 16.5 VDC EFI (1200 hp on Methanol)
– 200-250 GPH / 0-80 PSI
Maximum Horsepower: 2000 hp @ 14 VDC EFI (1000 hp on Methanol) 2400 hp @ 16.5 VDC EFI (1200 hp on Methanol) GPH / PSI Range: 200-250 GPH / 0-80 PSI .

- All billet body pumps are 100% serviceable/repairable
- Self Priming Pump may be mounted above fuel cell Vertical or horizontal mount
- Breakaway coupling prevents pump/motor damage in the event of fuel contamination
- All internal components are 100% metallic No plastics or composite materials. Our internal pumping elements are made of high speed tool steel and bronze. This results in the longest lasting, highest quality, most durable pumps available.
- Body machined from billet aluminum
- For carbureted and injected engines
- Provides Consistent Performance with no fall-off in flow
- Precise fuel delivery
- Blades self-compensating for wear
- 6 lbs Current Fuels: Weldon Pumps offer the widest range of fuel compatibility. Gasoline – Methanol – Nitromethane – Diesel – Ethanol – All racing fuels Comments: Requires appropriate bypass regulator, a -10 return line is recommended.

Brand: Weldon Pump LLC
Part No: D2035-A
Deep Performance Part No: 001965
Fuel Pump Type: Electric external
Flow Rate: 220 gph/833 lph
Fuel Pressure (psi): 80 psi
Fuel Pump Voltage: 12v
Fuel Pump Inlet Size: -12 AN
Fuel Pump Outlet Size: -10 AN
Quantity: Sold individually.
Warranty: No

Weldon D2035-A electric fuel pumps offer flow rates to support 1,400 hp and higher. These high performance pumps provide precise and consistent fuel delivery. The D2035-A pumps work with both carbureted and fuel-injected engines.

Features and specs include:

* Self-priming
* Pump elements are 100 percent tool steel
* Bodies are machined from billet aluminum
* All billet body pumps are 100 percent serviceable
* Breakaway couplings prevent pump/motor damage in the event of contamination
* -12 inlet and -10 outlet O-ring ports
* Weighs 5.5 lbs.
* Fuel injected engines:
1,600 hp at 50 psi (naturally aspirated)
1,800 hp at 80 psi (boosted)
* Carbureted engines:
2,000 hp at 7 psi (naturally aspirated)
1,800 hp at 30 psi (boosted)
* Compatible with gasoline, methanol, diesel, ethanol, and all racing fu

- Brand: Weldon Pump LLC
- Manufacturer's Part Number: 1100-A
- Deep Performance Part Number: 001964
- Fuel Pump Type: Electric external
- Flow Rate: 155 gph/587 lph
- Fuel Pressure (psi): 100 psi
- Fuel Pump Voltage: 12 V
- Fuel Pump Inlet Size: -10 AN
- Fuel Pump Outlet Size: -10 AN
- Quantity: Sold individually.
- Warranty: No

Weldon 1100-A electric fuel pumps offer flow rates to support 880 to 1,400 hp. These high performance pumps are extremely quiet, while providing precise and consistent fuel delivery. The 1100-A pumps work with both carbureted and fuel-injected engines.

Features and specs include:
* Self-priming
* Continuous duty pump with extremely low current draw
* All internal pump components are 100 percent metallic
* Housings are made from 304 brushed stainless steel
* Mil-Spec clear anodized billet end caps
* -10 inlet and outlet O-ring ports
* Two stainless steel T-bolt style clamps included with each pump
* Weighs 6.0 lbs.
* Fuel injected engines:
1,400 hp at 50 psi (naturally aspirated)
1,000 hp at 80 psi (boosted)
* Carbureted engines:
1,600 hp at 7 psi (naturally aspirated)
1,500 hp at 30 psi (boosted)
*COMPATIBLE WITH GASOLINE ONLY.

- Brand: Weldon Pump LLC
- Manufacturer's Part Number: A2005-A
- Deep Performance Part Number: 001963
- Fuel Pump Type: Electric external
- Flow Rate: 120 gph/454 lph
- Fuel Pressure (psi): 80 psi
- Fuel Pump Voltage: 12 V
- Fuel Pump Inlet Size: -8 AN
- Fuel Pump Outlet Size: -8 AN
- Quantity: Sold individually.
- Warranty: No

Weldon A2005-A Electric Fuel Pumps:
- Weldon A2005-A electric fuel pumps are designed for use with carbureted and injected engines. They're self-priming and deliver a precise, consistent flow. These billet pumps are 100 percent serviceable, and their pump element is manufactured from tool steel.

- Brand: Weldon Pump LLC
- Manufacturer's Part Number: A2047
- Deep Performance Part Number: 001942
- Pressure Range (psi): 28-120 psi
- Regulator Inlet Size: -12 AN
- Regulator Outlet Size: -12 AN
- Return Fitting Size: -12 AN
- Regulator Material: Billet aluminum
- Regulator Finish: Black/Silver
- Quantity: Sold individually.
- Warranty: No

Features include:

* .438 in. bypass orifice
* PTFE diaphragm with O-ring seal ensures leak-free operation
* Flows up to 12 gpm
* 1/8 in. NPT gauge port
* 1/8 in. NPT manifold pressure reference port
* Adjustable between 28 to 120 psi
* -12 pressure and return ports
* Billet aircraft aluminum with Mil-Spec anodizing
* Compatible with gasoline, methanol, diesel, ethanol, all racing fuels

- Brand: Weldon Pump LLC
- Manufacturer's Part Number: A2040
- Deep Performance Part Number: 001941
- Pressure Range (psi): 0-110 psi
- Regulator Inlet Size: -10 AN
- Regulator Outlet Size: -10 AN
- Return Fitting Size: -8 AN
- Regulator Material: Billet aluminum
- Regulator Finish: Black/Silver
- Quantity: Sold individually.
- Warranty: No

Features include:

* .281 in. bypass orifice
* Fluorosilicone diaphragm
* Flows up to 6 gpm
* 1/8 in. NPT gauge port
* 1/8 in. NPT manifold pressure reference port
* Fuel pressure increases on a 1:1 ratio with boost
* Two -10 AN pressure ports/-8 AN return port
* Billet aircraft aluminum with Mil-Spec anodizing
* Compatible with gasoline, methanol, diesel, ethanol, most racing fuels

P/N: 25-305BK

- Brand: Walbro/TI Automotive
- Manufacturer's Part # F90000285
- Deep Performance Part #002979
- Fuel: GAS & E85
- Horsepower: 900+ at 60PSI, naturally aspirated applications
- Over All Pump Length: 131mm
- Main Housing Diameter: 39mm
- Lower Housing Diameter: 50mm
- Fuel Inlet Diameter: 11mm OD
- Fuel Outlet Diameter: 11mm OD
- Flow Rate: 470lph @ 40psi (120+ gph)
- Test Voltage: 13.5 Volts
- Warranty: No