DC Digital Thermatic Fan Switch Kit

https://www.deepperformance.com/web/image/product.template/95576/image_1920?unique=2874381
(0 review)

0444

345.00 AED 345.0 AED 345.00 AED VAT Excluded

345.00 AED VAT Excluded

Not Available For Sale

    This combination does not exist.

    Terms and Conditions
    Shipping: 2-3 Business Days

    DESCRIPTION

    Our very own designed Digital Thermatic Fan Switch Kit can be used with our Thermatic Fans, EWP's and competitors Fans.

    The sensor, a Temperature Probe (Air or Coolant Fitment) senses air temperature as it passes through the radiator with the sensor placed in the radiator fin section or the sensor can also be placed directly into the coolant system in combination with a Temperature Sensor Adaptor Kit 

    Sensor Wire length:

    • 142cm in total (Wire from switch 112cm plus sensor connector 30cm)
    • Post 15-Dec-2021 = 320cm total (Wire from switch 290cm plus sensor connector 30cm)

    *The sensor wire has been increased to 320cm from the 15-Dec-2021, batch date 2021

    The switch can run 1 or 2 fans and be used for 12 or 24 volt applications. It has an adjustable temperature range of 40ºC to 110ºC (104ºF to 230ºF) which can show Centigrade or Fahrenheit.

    • Fan #1 will start once the temperature reaches the set temperature.
    • Fan #2 (if applicable) will start operation 10 seconds after fan #1 starts. 

    The fan/s will operate until the temperature falls by 5°C below the set temperature.

    Recently Viewed

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.